LIMA Fish Feed Machine,Chicken Feed Machine
V. Energy-sng technology in feed production operation, ingredie for ingredie, energy-sng technology 1, raw material processing 1) closed Unwanted equipment. 2) Do not smash the raw material than the requireme in the feed process. Service Livestock 3) Selecting a crusher model that can be used to get the particle size with minimal driving force. Serving Livestock 4) Even the shifts are evenly fed and the load is constant. – Bottom Feed, Service Livestock 5) Use air assist systems to pulverize the system to increase production. 6) For steaming pieces and pleats, to ensure that steam is included in the steam box, do not diarrherate the steam into the atmosphere. – Bottled Feed, 7) Put some of the raw materials before crushing, only the part of the crude material that needs to be pulverized. 8) In the microfubus operation, it will be slightly pulverized and pulverized after mixing, and microclastly efficiency can be improved. 9) After the primary crushing and micro-pulverization, the grading equipment is added, and the excessive pulverization of the raw material is reduced. – Battle Operation. 2) Silk, the design of the scale should ensure that the material is completely discharged, without hng to use vibration unloading or mechanical discharge devices. 3) Correctly set ingredie, mixed cycles, reasonably arrange artificial feeding and liquid addition operations, and improve ingredient mixing operation efficiency. 3, Granulation: 1) Use AC speed controllers on the feeder to adjust the amount of feeding, keep the conditioning Manufacture of load and high efficiency operations. – Bottled Feed, Service Livestock 2) Use an AC speed controller on the mass transfer to control the discharge speed and keep the stripper full of materials. Serving Livestock 3) Use the automatic control system to control the operation of the granulation system and regulate energy input as needed to meet the prt operating conditions. 4)The cooler with a level controller such as a counter current cooler cools the particulate feed because this cooler saves 20-25% air volume than the ordinary horizontal cooler. Scientifically adjust the cooling time and air volume to avoid overcooling. Serving Livestock 5) Provides air from the coldest air source as possible to the cooling area of the particles in the cooler. ? The air flows through the centrifugal precipitator of the cooler in the air accumulated in the air pipe, causing appropriate static pressing to make the fan operate at its performance curve. 6) When using a granulator, scientifically regulate the roll distance of the crushing roller, avoid overcrowding, save energy. , Feed Production Operation Operation Involved Puffed, Packaging Work Section, Bulk Shipping, Warehouse Energy Sng Technology 1, Extrusion Puffed 1) Use AC speed controllers on the feeder to adjust the amount of feed, keep the stripper full load and high efficiency operation. – Bottled Feed, Service Livestock 2) Use an AC speed controller on the mass transfer to control the discharge speed and keep the stripper full of materials. – Biped Feed, Service Livestock 3) Use the automatic control system to control the operation of the extruded duffling machine system and adjust the energy input as needed to meet the prt operating conditions. Scientifically adjust the pressure, temperature, correctly controlling the density, ripening of the puffed product, and avoid overgrown and energy consumption. 4) Correctly Adjustment and Control Dryer and Temperature, Science Use Heat Exchange Equipment, and use part of hot air to recycle, improve energy utilization efficiency. Serving Livestock 5) Correctly Adjustment and Control Cooler Do tic Air Categories and avoid excessive cooling, and improve energy utilization efficiency. 2, Packaging Work Section – Bisted Feed, 1) Group Package and Equipment Concentrated in a region is conducive to approaching the material and transportation Packaged materials and brackets. This only requires few people to observe and operate the equipment. – Bottled Feed, Serving Livestock 2) Materials to be packaged should be arranged in close proximity equipment and convenient for forklifts and other power vehicles. Serving Livestock 3) In the cold season, isolation and only heat the area around the package equipment. Service Livestock 4) Check if the air is excessive use and whether there is leak. 3, Bulk Shipping: 1) Check if air is excessive use and pneumatic gate and vibrators have leaks. Service Animal Husband 2) Use grty from the silo to remove the feed directly into the car. 4, Warehousing: 1) The material arrangement in the warehouse should make the shortest path from the package to the storage to the loading area.,most direct. 2) There is enough storage room to take the forklift to take the least and enough to place and carry out the product. – Sound Feed, 3) The arrangement or design of the warehouse should make each kind of product can be stored and sent according to the principle of advanced first, and no need to remove the new goods before it can be old.
