LIMA Fish Feed Machine,Chicken Feed Machine
Wet Type Fish Feed Machine Extruder is one of fish feed making machine, which can be divided into single shaft feed machine and double screw feed making machine producing floating and sinking fish feed pellets. By adjusting the puffing degree of the equipment, the floating time of the feed in the water can be controlled to produce high-quality special fish food with different floating and sinking properties to suit different fish. In addition, it can be widely used in the production of dog, cat, fish and shrimp, fox, bird and various pet feeds, which is an ideal choice for investing in the pet feed industry.
Wet type fish feed machine VS Dry Type Fish feed extruder
The difference between the wet puffing method and the dry puffing method is that the raw materials are prepared in advance before entering the puffing, and the temperature is increased by steam or water and pre-cured. The so-called conditioning means that the raw material of pet food is heated and humidified by steam, so that the starch in the raw material is pre-gelatinized, the protein is denatured, and the raw material is softened.
Wet type fish feed machine can produce fish feed pellets and pet feed pellets similar to dry type fish feed machine
Wet type fish feed extruder specifications
Model | Capacity (kg/h) |
Main Shaft power |
Feeding power (kw) |
Screw diameter (mm) |
Cutting power (kw) |
Dimension (mm) |
Weight (kg) |
LM-40 | 40-60 | 7.5KW | 0.4 | 40 | 0.4 | 1500*1400*1250 | 350 |
LM-50 | 80-100 | 11 KW | 0.4 | 50 | 0.4 | 1470*1100*1250 | 400 |
LM-60 | 120-150 | 15 KW | 0.4 | 60 | 0.4 | 1470*1120*1250 | 450 |
LM-70 | 180-200 | 18.5 KW | 0.4 | 70 | 0.75 | 1650*1400*1300 | 600 |
LM-80 | 260-300 | 22 KW | 0.6 | 80 | 0.6 | 1800*1450*1300 | 690 |
LM-90 | 350-400 | 37 KW | 0.6 | 90 | 0.8 | 2100*1450*1350 | 950 |
Wet Type Fish Feed Machine Extruder Machine – features
1. Drive the cutter with a variable frequency motor to control the length of the feed pellets
2. Screw sleeve adopts jacketed construction, which can be injected in with hot steam or cooling water, thus the extruding temperature can be controlled effectively.
3. The conditioner can make the materials have fully gelatinization of starch by a combination of hot steam and mechanical shear/mixing. The materials may remain in the conditioner for a time over 180s.