LIMA Fish Feed Machine,Chicken Feed Machine
1 Too much feeding in a short time, causing blockage XKL China feed industry information network – based on feed, service livestock Exclude: Reduce feed speed.
XKL China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
2, there is a bean powder in the puffed bean powder during processing soybeans XKL China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
Cause: The raw material has not been pulverized or pulverized, and the screen leakage, damage, etc. XKL China Feed Industry Information Network – Based on Feed, Service Animal Husbandry
Exclusion: Check the pulverizer to replace the new screen. XKL China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
Temperature induced by the Temperature
XKL China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
Cause: The pressure ring is too small or the amount of vapor added is insufficient, and the temperature regulating temperature is too low, or the pressure ring or the screw wear. XKL China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
Replacement to a larger pressure ring or increase the temperature of the temperature, the material temperature after the massage should be 80 ¡ã C -90 ¡ã C. Keep the expanded cavity jacket inside the oil: the first table temperature 60 ¡ã C, the second surface temperature of 100 ¡ã C, the third surface temperature 125 ¡ã C, the fourth table temperature 145 ¡ã C. XKL China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry 4, blocking the powder when the powder is blocked or paste XKL China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
Cause: Water supply and steam pressure is too small or too large, and the vapor is too small. XKL China Feed Industry Information Network – Based on Feed, Service Animal Husbandry
Troubleshoot: Adjusts water or steam pressure. XKL China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
The output declines, no production capacity XKL China Feed Industry Information Network – Based Feed, service livestock
Cause: Conical pressure rings or wear ring wear, or severe screws. xKL China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
Replacement of the grinding. XKL China Feed Industry Information Network – Based on Feed, Service Animal Husbandry
Suddenly do not discharge when working XKL China Feed Industry Information Network – Based Feed, serving livestock
Cause: 1) Too much feeding in a short time. 2) The foreign matter blocked the bore.
XKL China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
Exclusion: 1) Slow Slow Feeding Speed. 2) Stop, unclean it.
XKL China Feed Industry Information Network – Based on Feed, Service Animal Husbandry
7. The puffed particles are too large or too small
XKL China feed industry information Net – based feed, serving animal husbandry Cause: The bleeding is too large or too small.
XKL China Feed Industry Information Network – Based on Feed, Service Animal Husbandry
The appropriate discharge mold hole size is configured as required.
XKL China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
8. When machining soybeans, the puffed bean powder is reversed from the feed mouth XKL China Feed industry information network – based on feed, serving livestock
Cause: 1) The feed is too fast. 2) The discharge is not smooth or blocked. 3) The screw and pressure rings are configured. 4) The abrasion of the expandable cavity is serious. XKL China Feed Industry Information Network – Based on Feed, Service Animal Husbandry
Controls the feed speed and feed amount, and discharge the discharge screw and the shaft end cone nail The distance is required to be adjusted by fault 1; after the check is re-assembled, replace the new expansion chamber.
XKL China Feed Industry Information Network – Based on Feed, Service Animal Husbandry
XKL China Feed Industry Information Network – Based on Feed, service livestock
Cause: 1) The particle size relative to the mold is too large. 2) Insufficient water, is not enough to flow the material. 3) The structural arrangement of the extruded chamber is unreasonable. 4) The pressure loop diameter may be too large. XKL China Feed Industry Information Network – Based on Feed, Service Animal Husbandry Exclusion: 1) Crush to the appropriate fineness. 2) When the product enters the puffed cylinder, add water. 3) Arrange the pressure ring and the screw in a reasonable manner. 4) Replace the diameterSmaller pressure rings.
XKL China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
Product Forming (Lama)
XKL China Feed Industry Information Network- Based on feed, serving livestock
Cause: 1) The material formulation is not appropriate.2) The temperature is too high or too low during processing.3) The material entry is not measured (ignore or a little).4) The product moisture content is too high or too low.5) Blade wear (cutting effect).6) The raw material pulverized particle size is too large.
XKL China Feed Industry Information Network – Based on Feed, Service Animal Husbandry Troubleshooting: 1) Change the original formulation.2) Adjust the amount of tempered temperature and steam into the amount.3) Adjust the tamper-striped pulp to make the material uniformly enter.4) Reduce or increase the amount of water and steam.5) Replace the cutting blade.6) Crush the raw material to the appropriate particle size. XKL China Feed Industry Information Network – Based on Feed, Service Animal Husbandry
