Maintenance and maintenance of vertical pulverizer

LIMA Fish Feed Machine,Chicken Feed Machine

Mechanical work will aging, improper operation, and mechanical wear will make mechanical failure, so there are these reasons in common problems, then for vertical pulverizer These problems should be paid to the usual maintenance, so that the vertical pulverizer will work longer. The vertical pulverizer is placed in the upper portion of the machine to fall vertically into a high-speed rotating impeller. Under the action of high-speed centrifugal force, it is diverted in an umbrella shape in an umbrella shape in an umbrella, and a high-speed impact and pulverizing, material is After mourning with each other, the vortex is formed in the impeller and the housing, and the rotation is pulverized and pulverized, and the discharge is discharged from the lower portion, and the closed circuit multiple cycle is formed, and the desired finished particle size is controlled by the screening equipment. CCY China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

Repair, adjustment, and cleanup work in the operation of operators and equipment, prohibiting the opening of various small doors . CCY China Feed Industry Information Network – Based on Feed, Service Animal Husbandry

After the operation is normal, it can be added, and the feeding should be uniform, and it should be prevented from mixing the iron block hard object. Before the stop, the addition is stopped, and the material is broken and the electric motor is broken. Ccy China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

After maintenance or adjustment of the discharge, the vertical pulverizer should be used to turn the rotor first, confirm that the rotor and other parts are not Friction and caught phenomenon and flexibly rotate, can start the motor.

Ccy China Feed Industry Information Network – Based on Feed, Service Animal Husbandry

When the particle size of the crushing product is large, the plate should be stopped to prevent the rotor from being grinded. When the board hammer is adjusted by 180 deg; when used again, the weight of each plate should be equal and maintained to prevent the vertical pulverizer from being shaken after operation.

CCY China Feed Industry Information Network – Based on Feed, Service Animal Husbandry

When the fastener is loose, it should focus on check the pressed plate screws on both sides of the rotor on both sides of the rotor to prevent the pressure plate. After the side end of the plate hammer exposes the rotor, hit the body, and damage the machine.

CCY China Feed Industry Information Network – Based on Feed, Service Animal Husbandry

Whether the bearing seat seal is good, the grease in the bearing seat should be added once a month, every three months All clean and replace the oil felt.

CCY China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

When using, the next sheller is removed and the coupling bolt of the middle box is removed, then screwed to the flip with the wrench The hex head portion of the device is then slowly opened. At the same time, the rear shelves can be hung in the hanged device above the rack. Repeat the above process,Behind the shelves.

CCY China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry


Inquiry
Please feel free to give your inquiry in the form below. we will reply you quickly!


    LIMA Machinery