LIMA Fish Feed Machine,Chicken Feed Machine
First, the production of all-straen-stranded spikes N9E China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
After the strain is harvested, the straw is cut into 2 ~ 3cm straw. First put the 15 ~ 20cm thick hay in the silage kiln, put the crushed corn stalk, and the corn stalk is compacted by the tractor. In the middle of the curved roof, the corn stalk is smashed with a 2 ~ 3-layer plastic film, and the upper 20 ~ 30cm thick wet soil, the beat is light. N9E China Feed Industry Information Network – Based on Feed, Service Animal Husbandry
N9E China Feed Industry Information Network – Based Feed, serving animal husbandry
Put the maize parent to rub the silk machine into 2 ~ 3cm long hair, lay layer-by-layer, approximately 15 ~ 20cm per layer, until storage The material is outside the wiper 60cm. After stepping on the plastic film, the storage material is strict, and the plastic film is compacted in wet soil. N9E China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
N9E China Feed Industry Information Network – Based on the feed, serving the animal husbandry
With the natural air dried corn stalk, use the silk machine into 2 ~ 3cm, then use Xi’an New Tiandi straw fermented bacteria, straw (kg), The bacterium (G), salt (G), water (ML) is formulated according to 1000: 3: 7: 800 to 1000, and the appropriate amount of sugar is added. Then fill the stove layer by layer, spray layer-by-layer fungicide (about 110 ~ 120kg per ton of dry straw), compact layer by layer, each layer is about 20 ~ 30cm thick, so repeated until the top 50 ~ 60CM, finally sprinkled with the salt (salt of the salt), 250 grams per square meter), and then cover the plastic film, and the film is 15-20 cm. Seal.
N9E China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
N9E China Feed Industry Information Network – Based on the feed, serving the animal husbandry Put the unreliable natural air dry corn stalk with a silk machine into 2 ~ 3cm long, then add water per ton of dry straw to add about 110 ~ 120kg, so that the straw The water content is maintained at around 65%, that is, holding the sticker with hand, to finish the water droplets but not drip water, then fill it by layer.At the same time, add additives (30 kg per ton of straw), 30 kg, salt 2.5kg of salt, and compact layer by layer until the storage material is higher than 60cm, and the soil 30cm is sealed.
N9E China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
