Operating and maintenance of oil extrusion

LIMA Fish Feed Machine,Chicken Feed Machine

1. Check to determine the cleaning of the diverse bucket without any debris. DTW China Feed Industry Information Network – Based on Feed, Service Animal Husbandry

2, check the tapered piston in the farther position, the opening is the largest. DTW China Feed Industry Information Network – Based on Feed, Service Animal Hussence

3, the steam injection valve (pressure 0.2-0.3MPa) is preheated to the expandable barrel until the temperature rises tou003e 60 ¡ã C. DTW China feed industry information network – based on feed, service livestock

4, the steam injection valve is turned off, and the main motor is started. DTW China Feed Industry Information Network – Based on Feed, Service Animal Husbandry

5 To obtain qualified products. DTW China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

Once the product reaches the required yield, do not change the amount of dry amount and steam of the dry material, the load should be kept Stable, the temperature in the puffed cartridge should also reach a balance temperature (approximately 15-20 minutes). DTW China Feed Industry Information Network – Based on Feed, Service Animal Husbandry

7, usually the expandable hunger temperature reading is 105 ¡ã C ~ 115 ¡ã C, regulates the amount of vapor and yield to achieve the best Interior loose porous products. DTW China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

8, proportionally increase steam to maintain qualified products and prevent the main motor load exceeding the rated current value of the motor . DTW China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

9. In the day of operation, or during long run, the feed should be uniform and stable. A uniform rate is the most basic factor that is stably operated in the swivel machine. DTW China Feed Industry Information Network – Based on Feed, Service Animal Husbandry

The material should be ingredient, granular, humidity and temperature. DTW China Feed Industry Information Network – Based on Feed, Service Animal Husbandry

10 It should be from 0.6 to 0.7.5 MPa in the expander. DTW China Feed Industry Information Network – Based on Feed, Service Animal Husbandry

11. The input control of steam flow is achieved by manual steam injection valve. During the start of the start, manually control the vapor injection valve is determined by the revolution of opening. DTW China Feed Industry Information Network -Foot feed, service livestock

12. The power consumption of motor depends on the amount of motor pushing the material through the expander. DTW China Feed Industry Information Network – Based on Feed, Service Animal Husbandry

The load can be increased by the following methods. DTW China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

A, increasing the amount of feed. DTW China feed industry information network – based on feed, service livestock

B, making the tap tapered pin plug gap. DTW China Feed Industry Information Network – Based on Feed, Service Animal Husbandry

C, working under lower humidity conditions. DTW China Feed Industry Information Network – Based on Feed, Service Livestock

13 ] DTW China Feed Industry Information Network – Based on Feed, Service Animal Husbandry

A, spraying more steam. DTW China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

B, making the tap tapered gap. DTW China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

DTW Operation: DTW China Feed Industry Information Network – Based on Feed, Service Animal Husbandry [123 ]

a, the cone plug is at the farther, and the opening opening is maximum.

DTW China Feed Industry Information Network – Based on Feed, Service Animal Husbandry

After the main motor is started, the material enters the puffed barrel. Open the steam valve, start the cone-shaped hydraulic system motor, turn the manual commutation valve to the forward position, observe the thickness of the electricity and motor current, so that the standard (the size of the yield is proportional to the motor, the motor current and cone The plug opening is inverseby). Then turn the manual commutation valve handle to the intermediate position and cut off the hydraulic motor power.

DTW China Feed Industry Information Network – Based on Feed, Service Livestock

C, during production, according to the size of the material, the tapered tape is performed, the correction method is the same (B .

DTW China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

D, parking operation: Turn off the feed tablet first, open the cone plug, turn off the steam, the material walks from the puffed barrel Always, cut off the hydraulic system power supply and turn off the main motor.

DTW China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

Stop to stop, stop the feed first. When the feed conveyorAfter stopping the puffed machine, let the expander continue to operate to empty the materials in the machine.The discharge cone is retired to the maximum.

DTW China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry


Inquiry
Please feel free to give your inquiry in the form below. we will reply you quickly!


    LIMA Machinery