LIMA Fish Feed Machine,Chicken Feed Machine
The effect of moisture on particle durability and powder rate AQF China feed industry information network – based on feed, service animal husbandry
There is a significant season in the water moisture Differences, this difference has led to seasonal changes in feed production and feed particles. The content of the feed moisture and the granulation efficiency have a significant correlation, and the moisture in the feed can reduce the dust when the feed is pulverized and mixed. The gelation of feed starch is the primary factor affecting the quality of feed particles. The process of starch is divided into three phases: AQF China feed industry information network – based on feed, service animal husbandry
[123 ] (1) in reverse water absorption stage, the moisture into the amorphous portion of the starch granules, the volume is slightly expanded, the cooled drying, the particles can be restored, the birefringence is constant; AQF China feed industry information network – Bit Feed , Service livestock
(2) Dissolved rdquo; All entered the solution. As can be seen from the above process, the appropriate moisture is advantageous for thermural vapor to penetrate into the feed particles, and increase the germination of the starch (see Table 1), the moisture of the feed will affect the gelatinization of the starch and the mass of the particles. The powder rate of particle feed will increase significantly, and the customer’s related complaints increase. Feed Factory is mainly increasing the mass quality by increasing the compression ratio of the synovial membrane, but the unit energy consumption and production efficiency will decrease significantly. The appropriate moisture in the feed can increase the persistence of feed particles and reduce the content rate (see Figure 2, Table 2).
AQF China Feed Industry Information Network – Based on Feed, Service Animal Husbandry AQF China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
[123 ] Table 1. Effect of moisture on starch decenesis AQF China feed industry information network – based on feed, service animal husbandry
AQF China Feed Industry Information Network – Based on Feed, Service Animal Husbandry
Added moisture on particle persistence
AQF China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
[ 123] AQF China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
Table 2. Effects of Gasification Durability and Solution Rate of Granular Feeds AQF China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
AQF China Feed Industry Information Network – Based on Feed, Serving animal husbandry
Aquatic feed is high for water-saving time. If the feed is taken, the water is dissolved in the water, the fish cannot be completely eaten, will cause the feed to be severely wasted, bait The coefficient will be high. The water dissolution time and the germline of the starch have a direct relationship. The best adhesive in the aquatic feed is a dichlori, the degree of gelatinization of the sub-powder has a direct impact on the water dissolution time of the feed, from gelatinating Process, there is a need for water to participate, but fish feed is mainly protein feed such as soybean meal, fish powder, cotton meal, vegetable meal and other water composition, starch deamped, in order to improve the purpose of increasing dissolution time, During the production process, a high compression ratio of synovial granulation is required, so the power cost and mechanical cost of producing fish feed is high. In appropriate improved water in fish feed, it is possible to improve the gelation of the starch, and effectively improve the water dissolution time of the feed. AQF China Feed Industry Information Network – Based on Feed, Service Animal Husbandry
The quality of feed particles is directly related, but the moisture content of the feed raw material has a significant seasonal change, in the feed How to improve the quality of the low temperatures and high temperatures is that the quality of the feed is a problem that each feed company needs to consider. The focus of the problem is the moisture problem of the feed in the mixer, so some feeders want to increase the water of the finished product by watering water in the mixer, but this is dangerous, because the plus water is free water, these water is The surface of the feed is formed, and the moisture will be issued when the temperature is high, and the water is formed in the feed bag, resulting in the local mold of the feed, which is the main cause of feed mold in the high temperature season of the feed plant. one. The growth of molds causes the increase in feed mold toxins directly affecting the production of animals. It is therefore looking for a product that can effectively increase the moisture of the particulate feed and prevent flexible feed mills, which is of great significance to the production and benefits of the feed mill. AQF China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
