Top ten safety use techniques for straw crushers

LIMA Fish Feed Machine,Chicken Feed Machine

The straw pulverizer should be secured to the ground and can be fixed with cement. For frequent changes in work, the pulverizer and the motor are mounted on the base made of angle steel. SSN China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

Straw crusher should be carefully examined if it is installed in place, check that there is no installation is not strong enough. Whether the motor shaft and the pulveroid shaft are parallel, and it is necessary to check if the transmission belt is appropriate. SSN China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

Before starting, first turn the rotor, check whether the operation is flexible, there is no collision in the casing, Whether the rotation direction of the rotor is correct, the motor and the pulverizing machine are lubricated. SSN China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

Straw pulverizer Do not replace the pulley frequently to prevent the speed of too high or too low. SSN China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

Straw crusher feed should be uniform, if there is a loud sound, the bearing and the body temperature is too high or the outer injection It should be closed immediately and eliminate the fault. SSN China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

The staff should stand on the side of the straw pulverizer to prevent the rebounded debris injury. When the crushing long stems are too tight, it is too tight to prevent itself. SSN China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

After 300 hours of straw crusher, the bearing, replace the oil; when the oil is installed, 1 / 3 is good, with a maximum of 1/2. When stopped for a long time, the belt should be detached.

SSN China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

After the straw pulverizer is started, it should be idled by 2 to 3 minutes, and there is no abnormal phenomenon.

SSN China Feed Industry Information Network – Based on Feed, Service Animal Husbandry

The staff should carefully check the material carefully before work, prevent metal, stone, etc., to enter the crushing chamber.

SSN China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry

Straw pulverizer stopped feeding first, after the material is removed, and then cut off the power stop. Cleaning and maintenance after downtime.

SSN China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry


Inquiry
Please feel free to give your inquiry in the form below. we will reply you quickly!


    LIMA Machinery