LIMA Fish Feed Machine,Chicken Feed Machine
(1) The granulator may be in a certain part of the axis, so that the machine is not working properly, and the working current will produce fluctuations. High working current (stop checking or replacement bearing). DFR China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
(2) Ring Mode Holding, or only partial mold holes are discharged. The foreign matter is entered in the ring mold, the ring mold is wound, the gap of the pressure roller and the compression is too tight, the pressure roller wear or the pressure roller bearing cannot be rotated, and the granulator vibration (inspection or replacement ring mold, adjust the pressure roller gap). DFR China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
(3) The unbrepight of the coupling, the high and low, and the granulation opportunity has vibration, and the toothed oil seal Violent damage (coupling must be collapsed). DFR China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
(4) The spindle is not tightened, especially the D-type or E-type machine, the spindle is loosely generates axial direction. The pressure roller swing is obvious, the granulator noise is large, and the granulation is difficult (need to tighten the main shaft butterfly spring and circular nut). DFR China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
(5) Size gear wear, or replacing a single gear, there is also noise large (need to have a grinding time). DFR China Feed Industry Information Network – Based on Feed, Service Animal Husbandry
The material of the tunnel is uneven, which will cause the granulator working current to fluctuate (need to be adjusted Mass injection blade). DFR China Feed Industry Information Network – Based on Feed, Service Animal Husbandry
(7) Be sure to formulate a new roller, and configure a certain proportion of sandfi to grind, polished Use (eliminate the use of inferior rings). DFR China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
(8) Strictly control the injection and temperature, at any time to master the hydraulic water, the raw materials are too dry or too long The production is not normal to make the granulator work abnormally. DFR China Feed Industry Information Network – Based on Feed, Service Animal Husbandry
(9) The steel frame is not strong, the steel frame produces vibration in the normal operation of the granulator, and the granulator is easy to resonance. (The steel frame must be reinforced). DFR China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
(10) The tail of the regulator is not fixed or fixed in order to create shake (need to be reinforced). DFR China Feed Industry Information Network – Based on Feed, Serving Animal Husbandry
(11) Granulator Oil Leakage: Oil Seal Wear, Oil Level, Bearing Damage, Coupling Unbalance , Body vibration, forcibly starting, etc. DFR China Feed Industry Information Network- Based on feed, serving animal husbandry
